SKVA-01

SKVA-01

The SKVA-01 gas detecting system is a stationary type, multi-unit gas detector of continuous operation consisting of separate, functionally and structurally complete, territorially distributed blocks and modules connected to a local measuring network.

 SKVA-01M System Operation Manual

Data Sheets for the SKVA-01 Transducers

Data Sheets for SKVA-01 Composite Modules

SKVA-01 System Verification Procedure

Certificates and Licenses

DataSheet SKVA-01

  • Description
  • Specifications

The gas detecting system is designed to measure the concentration of toxic gases and combustible substances in air, archive the results, signal (by light and sound) about exceeding the set concentration levels, generate and issue control signals for external devices. The SKVA-01M gas detecting system supports information exchange with a remote terminal via the RS-485 and Ethernet interfaces.

The scope of the SKVA-01M stationary type gas detector is determined by the requirements set forth in regulatory documents related to equipment, measuring instruments, control, management, automation, and emergency protection (EP) of industrial enterprises, as well as the labour protection.

The gas-detecting complex consists of a set of blocks and modules subdivided by functional attribute into the following groups:

  • Transducers;

  • Devices for managing, collecting, and processing information;

  • Service devices.

The structure of any system, depending on the location and operating conditions of the gas detector, may include units and modules in explosion-proof and general industrial design.

For Projects for the SKVA-01M Gas Pollution Systems, see the Typical Solutions

The metrological characteristics of the system are determined by transducers and expansion modules included in the system.

The maximum quantity of transducers connected to one system is practically unlimited.

The maximum quantity of areas controlled by one system is practically unlimited.

The maximum quantity of relays installed in one system is practically unlimited.

Comparison of the SKVA-01 and SKVA-03 Systems

Characteristics SKVA-01 SKVA-03
The quantity of sensors connected to one system without additional power supplies 32 32
Maximum quantity of connected sensors Virtually unlimited 32
The quantity of gases types simultaneously controlled by one system Virtually unlimited 4
Quantity of programmable relays Virtually unlimited, the multiplicity factor is 8

Up to 16, the multiplicity factor is 4

Quantity of independent systems connected to the network

Up to 32

Up to 16

External interfaces

RS 485, Ethernet

RS 485, (Ethernet with optional converter board).

User Interface

LCD display and light and sound alarm

Available

Available for 8 control areas

LCD touch panel

Available

Unavailable

Availability of response archive

300 entries

300 entries

Service Buttons

Sound acknowledgment

Available

Available

Alarm Test

Available

Available

Lock

Available

Not available

System Programming

Requires trained qualified personnel and specialized software

Specialists having engineering education are admitted to work provided that they are familiarized with the operating instructions. The software is intuitive and does not require special knowledge.

The availability of tools to verify the system’s operability and the algorithm of work with medium free of gas admixtures

Unavailable

Available